How to Boost Your Radar Detector’s Performance

Radar detectors are famous for motorists because it can alert them of radar guns and speed traps nearby. Basically, radar detectors are devices created to sense radio waves whether it is X, K, Ka and Ku wavelengths. If you recently purchased one, you should know how to boost its performance.

Here’s how to boost your radar detector’s performance:

Mounting properly

Many new radar detector owners make mistake by mounting it unto the dash and then driving off immediately. If you want to be discreet and interpret the information right, it is crucial that you think about strategic Radar detector mount. The key here is to mount the detector where it has a clear view of the road ahead. Keep it level so you can see it without looking away from the road.

For best performance, be careful not to block its antenna. Do not mount it behind things made of metal like windshield wipers. If you mount it as high on the windshield, it will screw up laser detection not to mention you will deal with dangling power cords.

Protecting your investment

As with anything you own, you need to protect it. Keep in mind that a car equipped with a detector is valuable. If you leave it in an unattended parking garage, it is enticing other people. If leaving unattended can’t be helped, the least thing that you can do is to conceal the detector together with its cord and bracket.

Familiarising its alerts
Your detector is useless if you do not know how to interpret the alerts. Before you get on the road, it is important that you familiarise yourself with band alerts. You have to know that 70% of police radar guns use Ka band. With this, you need to pay attention when your detector picks this kind of band.

Using the right mode
There are different modes and it takes time getting used to these modes. The key here is to switch the modes on your radar depending on the road you are driving. The right setting will reduce or amplify the device’s sensitivity and it can help prevent false alarms. It is recommended that you use the Highway mode for a maximum radar detection range.

Adjusting speed right away

When you get a strong signal alert, it means that the radar is close. In fact, there is a possibility that it is already clocking you. When you get a strong signal, you should adjust your speed right away. Do not waste time and you will get lucky.

Remaining alert

This sounds like common sense but every motorist has different levels of alertness. If you stay alert all the time, you will have no problems. For inattentive people who go beyond the limit, they will eventually get nailed.